1. SINGLE BLADDER: The single bladder model has two (2) relief valves located on divers' right shoulder and divers' lower left. Inflator hoses and dump valves are interchangeable   Colors: Black or Red   (45 lb. Black only)

2. POWER DEFLATION / ORAL INFLATION: The unique elastomeric bands (use is optional) assist in deflation, but still allow the diver to orally inflate the BC.

3. ELIMINATION OF AIR SHIFT: The OMS ^® elastomeric bands evenly compress the BC, eliminating the massive airshift associated with non-banded BCs that typically occurs when changing body plane.

4. LOW DRAG / LOW SNAG: The OMS ^® bands typically retract the BC to a width less than the divers' shoulders, greatly reducing Drag and Snag potential.

5. TRIM ADJUSTABILITY: By adding or eliminating bands in different parts of the BC, the diver can adjust: a) lateral trim to compensate for stage bottles, cameras, etc. b) Horizontal trim e.g. head up, down or level.

BCs with retraction bands:

BCs without retraction bands features :

The OMS ^® 32 lb., 45 lb. and 60 lb. lift non-retraction band BC’s are made from the same superior materials as the banded BC’s. They incorporate a pull dump located at the diver’s side lower left and an inflator hose exiting the center of the BC tank side (the 32# BC’s inflator hose exits slightly off center).