OMS^® Ultra Bright Head Lamp

The Ultra Bright 3 W LED Head Lamp offered by OMS^® is probably one of the most versatile lights that you will ever own. This light can be mounted on a helmet (helmet and hardware not supplied) placed on your Hood (band supplied) on your head (band supplied), used as a Goodman light (strap supplied) or even mounted to your chest strap (band supplied).

VEGA FLASHLIGHT™ AND XENON FLASH STROBE

OMS^® has engineered the new VEGA 3W LED flashlight with backend optic rather than front end optics and incorporated "graded" high color temperature 3W LED's from Lumileds (they are up to 20% brighter than the standard Lumileds 3W LED's) resulting in perhaps one of the brightest if not the brightest 3W LED flashlight in the world !. Couple this with a highly collimated beam and a 330 fsw depth rating and you have one of the most useful lights in your diving arsenal.

The Flash Xenon Strobe with updated optics and improved waterproofing design is an essential tool for emergency signaling, anchor marking etc.

Both the VEGA and the double O-Ring Strobe are operational to 330 fsw.

For 2008 OMS^® offers (3) Phantom dive light:

• 10 W HID Canister light (6000 degrees Kelvin)
• 10 W HID Flashlight (6000 degrees Kelvin)
• NEW 21 W HID Canister Light

All Phantom dive lights are Ultra Compact, and coated with mil spec hard coat incorporating captured O-Ring assemblies in the lens and titanium screws to hold down the bezel. The 10w light heads can be held in your hand or you can affix the optional Goodman Handle (Fig. 1) or mount to a helmet.

Phantom lights use PCB’s that are field repairable, incorporate high reliability magnetic reed switches and 50 degree C thermal cutoff switches. The actuation switch has a replaceable high strength Nylon lockdown screw to prevent accidental turn-on or turn-off.

The high reliability abrasion resistant cord system eliminates leak prone compression connectors and instead incorporates superior captured O-Rings at the head and canister sealing areas resulting in a less than .5% failure due to flooding! All lights, before leaving the factory, are wet pot tested to 100 meters.

The 10w HID Mil Spec hard coat anodized flashlight (Fig. 2) is the smallest of its kind in the world incorporates (6) High energy density Lithium non-rechargeable batteries and easily turns on/off at rated maximum depth. The overall length of the flashlight is only 7.58" and maximum diameter is 2.45". This light like the (2) part Phantom incorporates a similar PCB, magnetic reed switch and thermal cutoff.

All lights incorporate high energy density Lithium and Lithium Ion battery technology designed for underwater applications.

(Fig 2)
L10wFL       10w HID Flashlight

For 2008 OMS^® introduces a 21 W Phantom dive light that incorporates twist actuation for On/Off and focus. Unlike many dive lights on the market this light uses a rugged 21Watt HID lamp with radial electrodes. This bulb will withstand an amazing force of 25 g’s before breaking! The bulb is centered in the parabolic reflector with a collet and is focusable from a narrow to flood beam. Additionally because the reflector is electropolished and protected from the water you do not experience deterioration in light output due to oxidation of the reflector or suspended particulates between the reflector and the bulb. The light quality is near sunlight @ 6000 degrees Kelvin giving accurate color rendition

We do not use inferior anodizing but supply all OMS®lights with a mil spec hard coat (twice as hard as anodizing) and incorporate captured O-Ring assemblies in the lens with titanium screws to hold down the bezel.

The high reliability abrasion resistant cord system eliminates leak prone compression connectors and instead incorporates superior captured O-Rings at the head and canister sealing areas resulting in a less than .5% failure due to flooding! All lights, before leaving the factory, are wet pot tested to 100 meters.