OMS logo
AUT GER FRA CAN AUS GBR USA BEL IT CZ PL  
  Country specific sites
Deutsch English Italia Czech Polish  
  Distributors


OMS ® Backplate Harness Systems
reg surface
Home
Products
Dealer Search
News & Updates

  Search by keywords or item #

      Help

Harness Setup

Rebreather
T Valve

Buoyancy
Compensators

Backplate
Accessories

Buoyancy
Systems

OMS® TESSERACT™ Closed Circuit Rebreather (CCR)


The OMS®   TESSERACT™ is a revolutionary CCR rebreather that allows the diver to explore more efficiently and safely with up to 6-10 hrs. of total breathing time! Because the TESSERACT™ weighs in at only 50 lbs. (with cylinders), measures 18” l x 16” w x 8” depth, and saves precious gas, it qualifies as a true world travel unit.
This product is in development with anticipated availability 3rd quarter 2008


OMS Rebreather front OMS CCR back


Specifications and Features

  • Can be flown: Fully closed circuit automatically or manually, or semi closed.
  • Solenoids, batteries and electronics are separate from breathing loop and enclosed in sealed compartments.
  • Radial Flow Easy Pack Scrubber: holds 7 lbs. CO2 absorbent.
  • Electronics automatically activate on entering water. On/Off can be overridden by the diver if required.
  • 4 Oxygen Sensors with robust voting logic.
  • Computer driven HUD with LED’s that display the PPO2 reading and system warnings.
  • Handset digitally displays the four oxygen sensors voted PPO2 readout on an LCD screen (No Battery Required) with sensor and battery warnings.
  • Dual Solenoid Design: (O2 and Diluent) Allows for robust control of both Low and High side PP02.
  • Oxygen injection is via an accumulator-valve-accumulator design (AVA) and is located prior to the scrubber and sensors. This allows for proper gas mixing prior to measurement by the controller.
  • This AVA design delivers the safety of a solenoid with the smooth delivery of a mass flow system.
  • Diluent Solenoid is used to automatically prevent PPO2 overshoots above 1.7ata PPO2 and to manually dry condensation off oxygen sensors (colder climates) or manual PPO2 reality check.
  • Set Point (At Depth): Pre-Dive Set with manual override permits a higher PPO2 for Deco.
  • Set Point (Surface to 17ftsw): Automatic switching to 0.7atm PPO2. Manual override permitted.
  • Battery types: Two 9v lithium Ion rechargeable batteries located internally in head (fully redundant).
  • Electronics port for serial output of voted PPO2 reading from the controller for use with the OMS® DCAP-X Trimix Computer Over-the-shoulder style counter lungs equipped with water dumps
  • Separate inlet and outlet ports on the counter lungs allow for proper water trapping.
  • (OPV) Over Pressure Valve located on the divers exhale counter lung (left)
  • (ADV) Automatic Diluent Valve located on divers’ inhalation hose at counter lung elbow (right). This allows the diver to breathe diluent directly if needed.
  • Arrangement of OPV and ADV allows for easy right arm crossing full loop dump.
  • Components are made from dimensionally stable non-off-gassing, glass filled urethane/nylon.
  • Steel 20 cu. ft. @ 2640 psi cylinders are standard with optional cylinders available
  • Right and Left OMS® Oxygen clean DIN valves
  • OMS® ’s Oxygen clean first stage regulators (2 pcs) and second stage regulator
  • OMS® ’s SPG’s (2) with BAR/PSI gauges
  • OMS® ’s harness and single-bladder 30 lb lift TESSERACT™ BC
  • Black high impact cover
  • 100 meter Depth Rating

Copyright © 1998-2007 Ocean Management Systems, Inc.        www.OMSdive.com       All rights reserved
Info @ OMSdive . com    Questions or Information on OMS products   
Specifications subject to change without notice           Not responsible for typographical errors
Corporate Information
          Comments about this site ? Web @ OMSdive .com